BE NL
BE FR
NL
FR
DE
EN
EN (UK)
PL
ES
DA
Choose your language
ECO GALVA
Save on your energy bills! Even in places with a higher humidity level like bathrooms.
Unique to the Stelrad ECO radiator is the concept whereby hot water flows directly into the front element first, giving it a higher temperature. This delivers more radiant heat, enhancing your feeling of comfort. As a result of the increased radiant temperature at the front of the radiator, the rear-most element is a little less warm than with other radiators.
This means there is less radiant heat lost through the wall via the back of the radiator. Altogether, this means an increase in your feeling of comfort, a reduction in your energy bills, an increase in the efficiency of your heating systems and a reduction in CO2 emissions.
Why opt for a Stelrad ECO Galva radiator?
- Protective galvanised coating
- Reduces your energy bills
- More radiant heat
- Higher average surface temperature in the front element
- Protective galvanised coating
- Retention of that feeling of comfort with lower temperature systems
- Faster to heat up
- Reduction in energy loss as the result of less heat radiated from the rear-most element
- Saves energy by pre-set thermostatic valve
- Suitable for renewable energy
- Environmentally friendly heating
- Valve that can be fitted on the left or right
Accessories
Downloads
Brochure
Technical manual
Product photo
Specification text
Calculate your heat emission
Manual
Assembly instructions
T2130 Montagevoorbeelden – exemples de montage – Montagebeispiele – mounting examples
PDF Size: 696 KB
Download
Technical details
The ECO radiator and its serial flow technology are perfectly suited to operate in low-temperature heating systems. This technology (water flows first through the front panel) results in higher energy efficiency, maximum radiation, faster heating rate and less waste of energy through the back wall. In addition, the ECO Galva radiator is treated with a protective galvanized coating, so it can be used without any concerns in wet areas.
Specification text
Specification text
| Product: | low-temperature valve radiator with serial flow technology, perfectly suited for low-temperature heating systems and equipped with a protective galvanised coating underneath, both a centre and lateral bottom connection and a preset valve insert, which can be fitted on the left or right side of the radiator |
| Finishing: | protective galvanised coating without top grille or side panels |
| Pre-installed: | preset Heimeier 4368 or 4369 valve insert, ECO air vent and blind plugs |
| Valve insert: | The integrated adjustable valve insert (without thermostatic head) is factory-fit on the right side of the radiator, CEN certified, tested in accordance with EN215 and compatible with thermostatic heads M30 x 1,5 mm. For types 21, 22 and 33 the valve insert can also be fitted on the left side of the radiator. The thermostatic valve insert is factory-set in relation to the size of the radiator. This presetting ensures optimum throughput in the radiator. Factory setting for two-pipe systems, also suitable for one-pipe systems (as long as the valve insert is adjusted to position 8). |
| Also supplied: | VDI brackets with anti-lift (type Monclac), screws, plugs and installation instructions |
| Connections: | 2 x ¾” male Eurocone centre connection and 2 x ½” female lateral bottom connection |
| Lugs: | 2 pairs of mounting lugs |
| Packaging: | Every radiator is sturdily packaged in high-quality cardboard and wrapped in plastic. The product description is shown on the label: type – height – length. |
| Warranty: | 10 years, as long as the installation instructions have been followed and Stelrad’s warranty conditions have been met. |
| Paint process: | All radiators are galvanised, degreased, phosphated, cataphoretically primed and powder-coated in Stelrad white 9016 as standard. |
| Colours: | Stelrad white 9016 + 35 different Stelrad colours and about 200 RAL-colours are possible |
| Heat cost allocator: | Suitable for heat cost allocators, both electronic and according to the evaporation principle (covered by the norm of EN834 & EN835). |
| Max. operating pressure: | 10 bar (tested to 13 bar) |
| Max. operating temperature: | 110 °C |
| Conformity: | in accordance with EN442 |
| Types: | 11 | 21 | 22 | 33 |
| Heights: | 400 | 500 | 600 | 700 | 900 mm |
| Lengths: | 400 – 1.600 mm |
| Depths: | 60 | 77 | 100 | 158 mm |
Specification text
ECO-GALVA-EN
Document Size: 18 KB
Download
Type overview
Type overview
| Height | Type 11 | Type 21 | Type 22 | Type 33 | |
|---|---|---|---|---|---|
| (mm) | |||||
| 400 | W | 687 | 978 | 1.212 | 1.726 |
| kg | 11,68 | 18,28 | 20,55 | 30,53 | |
| l | 2,34 | 4,62 | 4,62 | 6,93 | |
| m² | 2,95 | 3,37 | 4,92 | 7,38 | |
| n | 1,3057 | 1,2729 | 1,2867 | 1,2838 | |
| 500 | W | 848 | 1.174 | 1.452 | 2.071 |
| kg | 14,99 | 22,72 | 25,60 | 38,17 | |
| l | 2,80 | 5,78 | 5,78 | 8,67 | |
| m² | 3,80 | 4,31 | 6,33 | 9,49 | |
| n | 1,2968 | 1,2912 | 1,2982 | 1,2959 | |
| 600 | W | 1.000 | 1.360 | 1.679 | 2.387 |
| kg | 18,30 | 27,15 | 30,65 | 45,80 | |
| l | 3,25 | 6,95 | 6,95 | 10,40 | |
| m² | 4,66 | 5,24 | 7,74 | 11,61 | |
| n | 1,2880 | 1,3095 | 1,3096 | 1,3081 | |
| 700 | W | 1.142 | 1.538 | 1.896 | 2.674 |
| kg | 21,33 | 31,32 | 35,63 | 53,18 | |
| l | 3,77 | 8,12 | 8,12 | 11,27 | |
| m² | 5,51 | 6,18 | 9,15 | 13,72 | |
| n | 1,2889 | 1,3152 | 1,3129 | 1,3207 | |
| 900 | W | 1.397 | 1.872 | 2.303 | 3.171 |
| kg | 27,40 | 39,65 | 45,60 | 67,94 | |
| l | 4,80 | 10,45 | 10,45 | 13,00 | |
| m² | 7,22 | 8,05 | 11,97 | 17,96 | |
| n | 1,2907 | 1,2751 | 1,2898 | 1,2327 |
Calculation Factor per meter length radiator at 75/65/20 °C in accordance with EN442
Characteristic equation: ф = KM x ΔTn
Heat Output & Dimensions
Heat output and dimensions
Calculate your heat emission
ECO-GALVA-EN
Document Size: 37 KB
Download
Connection possibilities
Connection possibilities
| TYPE 11 |
 |
| TYPE 21-33 |
 |
Important notice: The green ECO air vent is essential for the proper working of the radiator and cannot be replaced by a traditional air vent as the radiator will keep on heating.
Lugs
Lugs
| TYPE 21-33 | ||||||
|
||||||
| TYPE 11 | ||||||
|
Installation
Installation
| TYPE 11 | TYPE 21 | TYPE 22 | TYPE 33 |
 |
 |
 |
 |
Connection dimensions
| TYPE 11 |
 |
| TYPE 21-33 |
 |
| L = Length of the radiator |
Heat output
Calculate your heat emission
Choose your colour
Warmth is essential for creating a cosy home. As is an interior that you feel good in. With Stelrad you can now opt for colourful warmth.
 |
 |
 |
 |
 |
 |
 |
| NT110 Papyrus white |
NT120 Pearl white |
NT130 Champagne |
NT140 Beige |
NT160 Pebble grey |
NT170 Quartz grey |
NT180 Soft black |
 |
 |
 |
 |
 |
 |
 |
| ML110 Dove grey |
ML120 Titanium grey |
ML134 Blue grey |
ML140 Granite |
ML150 Cappuccino |
ML160 Terra brown |
ML170 Graphite black |
 |
 |
 |
 |
 |
 |
 |
| SN110 Cream white |
SN120 Cream |
SN130 Mocca |
SN140 Bordeaux |
SN150 Sepia |
SN160 Pale blue |
SN170 Black |
 |
 |
 |
 |
 |
 |
 |
| A1004 Golden yellow |
A2003 Pastel orange |
A3002 Carmine red |
A5002 Ultramarine blue |
A6018 Yellow green |
A7001 Silver grey |
A7011 Iron grey |
 |
 |
 |
 |
 |
 |
 |
| A7016 Antracite grey |
A7030 Stone grey |
A7035 Light grey |
A8017 Chocolate brown |
A9003 Signal white |
A9005 Jet black |
A9010 Pure white |
The above colour palette can be further expanded with a multitude of RAL colours. The colours depicted are indicative only. For an accurate indication of the colour, you can request a free colour sample.