PLANAR STYLE 8
decorative valve radiator with a stylish front and 8 connections
The Planar Style 8 is with a stylish front, perfectly fitting side panels and upper grille a decorative radiator that creates an atmosphere of light and space. Furthermore you have, thanks to the 4 side- and 4 bottom connections, a variety of connection possibilities. This makes the Planar Style 8 easy to install and applicable in about every situation.
This radiator comes with all parts required to mount the radiator.
Why choose a Stelrad Planar Style 8 radiator?
- Universal and flexible
- Depending on the specific situation you select 1 out of 8 connection possibilities
- For each new build project
- Renovate while maintaining existing piping
- The most comprehensive selection of available sizes
- Decorative stylish front
- Including VDI-brackets (Type Monclac)
- Preset adjustable thermostatic valve insert
- Available in over 200 colours
Discover the Stelrad Planar Style 8 in 3D
Click and hold the left mouse button, then drag to rotate the radiator. Scroll to zoom in or out.
Choose your colour
Choose your colour
Warmth is essential for creating a cosy home. As is an interior that you feel good in. With Stelrad you can now opt for colourful warmth.
The above colour palette is supplemented with over 200 RAL colours.
Stelrad Eclipse thermostatic insert
Towel bar – chrome
Chrome magnetic towel rail
Stelrad thermostatic head
Double connection fitting – Straight, without drain-off facility
Double connection fitting – Straight, with drain-off facility
Double connection fitting – Angled, without drain-off facility
Double connection fitting – Angled, with drain-off facility
The Planar Style 8 is with a stylish front, perfectly fitting side panels and upper grille a decorative radiator that creates an atmosphere of light and space. Furthermore you have, thanks to the 4 side- and 4 bottom connections, a variety of connection possibilities.
This makes the Planar Style 8 easy to install and applicable in about every situation.
|Product:||decorative valve radiator with a stylish front and 8 connections|
|Finishing:||decorative stylish front, upper grille and side panels|
|Pre-installed:||preset valve insert, air vent and blind plugs|
|Valve insert:||The integrated adjustable valve insert (without thermostatic head) is factory-fit on the right side of the radiator, tested in accordance with EN215 and compatible with thermostatic heads M30 x 1,5 mm. The thermostatic valve insert is factory-set in relation to the size of the radiator. This presetting ensures optimum throughput in the radiator. Factory setting for two-pipe systems, also suitable for one-pipe systems (as long as the valve insert is adjusted to position 8).|
|Also supplied:||Monclac brackets (VDI compliant when used in combination with included anti-slide clips), screws, plugs and installation instructions|
|Connections:||4 x ¾” male Eurocone bottom connection (2 x centre- and 2 x lateral) and 4 x ½” female side connection.|
|Lugs:||Type 11 is equipped with 2 pairs of mounting lugs up to 1.600 mm and 3 pairs from 1.800 mm|
|Packaging:||Every radiator is sturdily packaged in high-quality cardboard and wrapped in plastic. The radiator’s characteristics are shown on the label: type – height – length.|
|Warranty:||10 years, as long as the installation instructions have been followed and Stelrad’s warranty conditions have been met.|
|Paint process:||All radiators are degreased, phosphated, cataphoretically primed and powder-coated in Stelrad white 9016 as standard.|
|Colours:||Stelrad white 9016 + 35 different Stelrad colours and about 200 RAL-colours are possible|
|Heat cost allocator:||Suitable for heat cost allocators, both electronic and according to the evaporation principle(covered by the norm of EN834 & EN835).|
|Max. operating pressure:||10 bar (tested to 13 bar)|
|Max. operating temperature:||110 °C|
|Conformity:||in accordance with EN442|
|Types:||11 | 21 | 22 | 33|
|Heights:||300 | 400 | 500 | 600 | 700 | 900 mm|
|Lengths:||400 – 2.000 mm|
|Depths:||63 | 79 | 102 | 160 mm|
|• Download:||Click here to download the complete specification text|
|Height||Type 11||Type 21||Type 22||Type 33||Centre distance|
Calculation Factor per meter length radiator at 75/65/20 °C in accordance with EN442
Characteristic equation: ф = KM x ΔTn
When connecting as a valve radiator:
When connecting as a compact radiator:
- the valve insert has to be removed
- the plastic plugs have to be replaced with brass plugs.